5.5 ML J-TANK This tank is the Same Diameter as the Silver Bullet, and Is basically made for Big Battery mods. You can still use it on smaller units like the eGo. But it might look a little bit silly.

(PRE CUT CARTOS ARE SOLD SEPERATELY)

PolyCarbonate

These are Made Right here in the Town we Live in. Ogden, UT USA!

These hold Any 510 Cartomizer but we Prefer Boge.

To use you need to Cut Slots in your Cartos with a Dremel Rotary Tool. We will post a video shortly as an instructional.

THIS SHOULD BE COMMON KNOWLEDGE BY NOW BUT E-LIQUIDS CONTAINING CINNAMON EXTRACT

CAN AND WILL CRACK THE POLYCARBONATE TUBING. USE AT YOUR OWN RISK.

(PRINTED INSTRUCTIONS ARE BELOW THE VIDEOS)

Unit does NOT come with a Pre-Cut Cartomizer! PRE-CUT AVAILABLE here: http://www.electronicstix.com/ACCESSORIES/CARTO-TANKS/SINGLE-PRE-SLOTTED-CARTOMIZER-FOR-J-TANK-p522.html

HOW TO PROPERLY FILL AND RE-FILL A J TANK

TO FILL:

Remove one side of tank completely.

Insert fresh cartomizer.

(inspect carto to make sure you can see through air hole, if not use paper clip to align hole. otherwise you may

experience flooding or bad air flow. this issue should be resolved soon with new batch of cartos)

Fill Tank almost 7/8 full.

Gently press top back onto tank and it will force liquid in through holes/slits.

look @ top of carto, it should still be dry, drip some juice in and let it sit for a minute, then blow onto paper towel.

Attatch to device.

Do a few dry pulls on tank to make sure juice is going and then vape.

If you ever think you are going a little dry do some dry pulls without activating device. 

you should be golden then.

REFILLING:

To refill carto remove tank from device. 

Push threaded end into carto until you can add juice. 

Add juice.

push carto back to position

wipe clean

enjoy.